Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Nuts and inserts
  5. Insulating cap for T-nut C8 in slot C10
[3842146972] Fastening set QV
[3842504790] Threaded sleeve M12

Insulating cap for T-nut C8 in slot C10

https://leanrobot.eu/web/image/product.template/2864/image_1920?unique=1d9bc53

High-strength black polyamide insulating cap: it wraps the T-nut for slot C8 and mounts it in slot C10, insulating the component from the profile. For accessories that have their own direct grounding.

Read more ↓

Not Available For Sale

Code: 3842524012
  • Brand
  • Slot mm
  • Colour
  • Technical notes
  • Material
  • Slot mm

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Nuts and inserts
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Technical notes Insulating cap for slot 8 T-nuts in slot 10
Colour black
Slot mm 10
Material High-strength polyamide (PA)
Slot mm 10
Tags
Tags
Bosch 5S1

When you fix to the frame a component with direct grounding that must not have electrical contact with the profiles: the cap separates the nut from the slot.

The T-nut for slot C8: the cap adapts it to the C10 slot of the profile and insulates it.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products