Short terminal FIFO rails are end-stop components designed for use with the FIFO Station rail system, available in Short Left and Short Right versions to ensure correct First In First Out material flow orientation. They integrate into internal logistics workstations to precisely define the terminal points of the rail. Supplied in packs of 10 pieces, they support efficient spare parts management and serial installations.

The Steel terminal Monorail LiFo is an end-stop component designed for FiFo Monorail rail systems, available in 40 mm and 55 mm versions to suit different installation configurations. Its steel construction ensures structural durability in LiFo flow-controlled handling stations. Supplied individually (1 pc), it integrates into the LeanProducts Monorail accessories range for lean logistics applications.

The Rail Jointing Element (MONO-SV-100) is designed to connect and extend rail sections within FIFO stations and lean logistics environments. Its circular cross-section and compatibility with the Green Frame 45° joint range ensure versatile integration across manufacturing and logistics applications. Supplied in packs of 10 pieces.

The Piano per Carrello LL is an accessory within the LiftLiner – Lean Logistic range, available in two footprints: 1200x800 mm and 1200x1000 mm, to match standard LL Trolley configurations. Two versions are offered — plywood with holes and aluminium deck with holes — allowing selection based on load requirements and operational workflow conditions. The deck integrates directly with LL Trolley frames, supporting the modularity of the LiftLiner system.

LiftLiner 2 load units is a patented electric logistics train by K.Hartwall, engineered for Fork-Lift-Free environments through a scissor-coupling system that ensures precise tracking and a compact train length. It accommodates pallet and shelf carts in sizes 800×600, 1200×800 and 1200×1000 mm, with loading/unloading access from both sides and an ergonomic tilt designed to ease the unloading phase for the operator. Compatible with standard and automated AGV tuggers (PLd safety level), the fully electric system operates at up to 16 km/h with minimal maintenance requirements.

The Milkrun Drawbar Assembly (LP-D0100) is a component dedicated to internal logistics train management, designed to ensure maneuverability and directional control on milkrun routes in lean manufacturing environments. It integrates with dolly systems and pallet adapters to optimize material flow along production lines. The solution supports the implementation of cyclic replenishment logic, reducing handling times and improving internal flow efficiency.

The additional shelf for Dolly Taxi is available in two sizes — 1200×800 mm (ref. LP-KA108) and 932×600 mm (ref. LP-KA109) — designed to expand the storage capacity of LP-KT001 and LP-KT021 Dolly Taxi trolleys. Shelf height is adjustable in 50 mm increments, allowing configuration to suit different load types and heights. Load capacity is 200 kg per shelf, reduced to 125 kg when fitted at H=1200 mm. Steel construction with blue zinc treatment to EN-ISO 2081 ensures consistency with the base unit.

The containment plate kit (2 pcs) – cod. LP-KA214 – is designed for fastening rollers on plates with maximum thickness of 2 units, ensuring stable assembly in pallet dolly systems. The package includes 2 plates, sized for lean logistics applications requiring precise containment and guidance of rotating components. Compatible with Lean Logistic line solutions, it represents a modular element for configuration and maintenance of pallet trolleys.

The Belt with ratchet is a securing and tensioning system designed for safe load anchoring on dollies and pallets in lean logistics. Available in Left and Right versions, it adapts to various internal material handling configurations. The dual directional variant allows flexible integration into existing line layouts.

The Mini Dolly Pallet (923x600 mm) is a compact material handling platform with load capacity up to 1000 kg, available in versions with non-slip belt, plywood deck or diamond-plate aluminum surface. The polyurethane wheels Ø 160 mm — 2 swivel with brake and 2 fixed — ensure stability and control in production and warehouse areas. The integrated 3-position retractable towing device and folding handle facilitate manual pulling and space-saving stacking.

The Dolly Pallet Extension (LP-KP025) extends the transport surface of the Dolly Pallet up to 1800 mm in length, maintaining a standard width of 800 mm and a load capacity of 1000 kg. The version with non-slip belt ensures safe load retention during internal handling. The wheel assembly — 2 swiveling with brake and 2 fixed in polyurethane Ø 160 mm — ensures directional stability even with bulky or elongated loads.

The Ergonomic Handle for Dolly (LP-KA010-1) is an accessory designed to ensure safe and ergonomic handling of Lean Dollies in 600×400 mm and 600×800 mm formats. Equipped with two ergonomic grips, it reduces the physical effort of the operator during pushing and controlling the trolley. The solution falls within the category of safety and ergonomics accessories in the field of lean logistics.

The Dolly 1200x800 is a handling platform with dimensions 1200×800 mm and load capacity up to 300 kg, designed for integration in lean logistics flows to support European standard pallets. It is available in two wheel configurations in polyamide or rubber Ø 100 mm (4 swivel + 2 fixed), to adapt to different transit surfaces. The presence of the tiller allows precise guidance and reduces operator effort during internal transport maneuvers.

The Angular Containment Kit for Dolly 800x600 (LP-KA111) is designed to increase load safety during handling on 800x600 mm dolly, delimiting the perimeter of the transport surface. Supplied in a package of 4 pieces, it allows quick installation at the dolly corners without structural modifications. The solution integrates natively with the LeanProducts Dolly 800x600 range, supporting lean logistics flows and standardization of handling units.

The plywood platform for Dolly 800x600 (cod. LP-KA082) is an accessory designed to expand the load surface of the Dolly 800x600, optimizing material transport in lean logistics contexts. The plywood platform offers a rigid and uniform base, compatible with dolly versions available with polyamide, rubber, or ESD polyamide wheels of Ø 100 mm. The combination with the dolly allows a load capacity up to 500 kg on a 600×800 mm platform, suitable for structured internal handling flows.

The angular containment kit for Dolly 400x600 (LP-KA110) is designed to delimit and stabilize loads on 400×600 mm format dollies, reducing the risk of slipping during internal handling. Available in ESD rubber, polyurethane, and ESD polyurethane versions, the kit adapts to the needs of electrostatically sensitive environments or general use. The standard package includes 4 pieces, allowing complete protection of the four corners of the dolly.

The Plastic Tray (LP-KA001) is a versatile lean logistics accessory designed to hold plastic boxes or to be integrated into industrial shelving systems. Key structural features include a retractable front baffle, a fixed cup holder, and a rear cover, ensuring content stability and order during handling operations. Its compact design also makes it suitable for use as a display stand, charging station, or protection case in visual management environments.

The Dolly 800x600 is a low-deck material handling platform with load capacity of 500 kg and footprint 600×800 mm, designed for integration into lean logistics flows and compatible with standard pallets. Available with polyamide, rubber or ESD polyamide wheels (Ø 100 mm) in 3 swivel + 2 fixed configuration, it adapts to production environments with different floor requirements and electrostatic charge control needs. The version with tiller facilitates manual traction on supply routes, while the angular containment kit LP-KA111 is available as a dedicated accessory.

The Dolly Type VII C (LP-KD710) is a lean material handling platform in steel with blue zinc surface treatment EN-ISO 2081, dimensions 600×400 mm and nominal load capacity of 250 kg. The wheel unit consists of 2 swivel wheels and 2 fixed wheels in polyamide Ø 100 mm, ensuring controlled rolling on production lines and logistics areas. The raised platform and integrated tiller facilitate precise positioning and manual translation of the dolly, while compatibility with pallet adapters extends its versatility in the kit flow system.

The Dolly Type VII B is a material handling platform in steel with blue zinc surface treatment (EN-ISO 2081), available in 600×400 mm and 600×500 mm formats with a rated capacity of 250 kg. The wheel configuration is selectable from four variants with Ø 100 mm wheels — polyamide, rubber, polyamide ESD or polyamide/rubber combination — to adapt to different flooring requirements and electrostatic discharge control. The four-wheel design (2 swivel + 2 fixed) ensures guided maneuverability in lean logistic routes, with compatibility with adapter pallets from the LeanProducts range.