Skip to Content
  1. All Products
  2. Cleaning
  3. CC1 Pro AI-powered Autonomous Cleaning Robot
LongLife Low Duty - Roll
LL Trolley

CC1 Pro AI-powered Autonomous Cleaning Robot

https://leanrobot.eu/web/image/product.template/1695/image_1920?unique=c607105

PUDU CC1 Pro is the 4-in-1 floor scrubber robot with artificial intelligence: it scrubs, sweeps, vacuums short-pile carpet and removes dust. On top of full cleaning (700–1000 m²/h) it adds AI targeted cleaning (1500–3000 m²/h): the rear camera recognises stains, adjusts intensity and checks the result.

It navigates with VSLAM+ without ceiling markers, offers heat maps and component self-diagnosis, has 15 + 15 L tanks and up to 9 h runtime (4 h on carpet). IEC 63327 certified.

Read more ↓

Not Available For Sale

Code: P-CC1PROB
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Weight
  • Dimension mm
  • Cleaning Efficiency m²/h
  • Working Width mm
  • Cleaning Type
  • Floor Type
  • Modes
  • Tank Capacity L
  • Speed m/s
  • Passage Width mm
  • Charging Time h
  • Runtime h
  • Navigation Systems
  • Charging Methods
  • Color

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Pudu Robotics
Contact Us
Cleaning, Cleaning
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Weight 75 Kg
Dimension mm 629x552x695
Cleaning Efficiency m²/h 700-1000 (full cleaning); 1500-3000 (AI targeted cleaning)
Working Width mm 500 (with side brush)
Cleaning Type Dry and wet
Floor Type Hard floor and short-pile carpet
Modes Scrubbing, sweeping, vacuuming, dust removal
Tank Capacity L 15 solution and 15 recovery
Speed m/s 0.2-1.2
Passage Width mm 700
Charging Time h <3.5
Runtime h 4-9 (depending on mode; carpet 4)
Navigation Systems VSLAM+ (vision + LiDAR), no markers
Charging Methods Wired charging (replacement battery) and automatic charging (charging station sold separately)
Color Black
Tags
Tags
Pudu Robotics

Pudu CC1 and CC1 Pro combine sweeping, scrubbing, vacuuming and dust mopping in one robot, with four cleaning modes:

  • standard sweeping;
  • scrubbing of hard floors;
  • carpet vacuuming;
  • silent dust mopping.

You choose the mode for each area and switch it with one tap.

During its round, the CC1 Pro uses cameras and artificial intelligence to recognise the most common wet stains, such as coffee, sauces and puddles, and immediately creates the route to clean them. In this mode it works only where needed and reaches 1500–3000 m²/h. On stubborn stains it increases cleaning power on its own. If a floor pattern is mistaken for a stain, you can exclude it from recognition.

On indoor floors in commercial and public buildings: supermarkets and shops, shopping centres, hotels, offices and residential buildings, schools, healthcare facilities, restaurants, stations and transport hubs, factories and warehouses.

The rear AI camera looks at the floor after the pass: if it finds residual stains it goes over the area again and marks those that remain on the map. At the end of the job it generates the cleaning heat map; with Ultra Spot Clean you then quickly clean the areas where dirt appears most often. With guided cleaning the robot leads the operator to the stubborn stains.

Both are 4-in-1 robots (sweeping, scrubbing, vacuuming, dust mopping) on the same base: same dimensions and weight, 15 + 15 L tanks and 700–1,000 m²/h in full-coverage cleaning. The Pudu CC1 Pro adds artificial intelligence features:

  • AI spot scrubbing: it recognizes wet stains (coffee, sauces, puddles) in real time and cleans them immediately, at 1,500–3,000 m²/h;
  • AI cleaning intensity control: it boosts power on stubborn stains, uses eco mode on areas that are already clean and adapts the mode to the floor type;
  • rear AI camera: it checks the result, re-cleans leftover stains and generates cleaning heatmaps;
  • component self-monitoring and compliance with IEC 63327.

The standard CC1 runs its scheduled tasks without visual analysis of the dirt.

The CC1 cleans 700–1,000 m²/h in full-coverage cleaning, with a 500 mm cleaning width (side brush included). The CC1 Pro has the same full-coverage rate and reaches 1,500–3,000 m²/h in AI spot cleaning.

It has a 50 Ah lithium iron phosphate (LiFePO₄) battery. Runtime stated by PUDU per mode:

  • scrubbing: 5 hours;
  • sweeping and vacuuming: 5 hours;
  • carpet vacuuming: 4 hours;
  • silent dust mopping: 9 hours.

Charging takes about 3 hours.

Yes, with the (optional) docking station: when the battery is low the robot returns to the station by itself to recharge and, at the same station, refills clean water and drains waste water with no manual intervention. Without the station it is charged by cable.

No, thanks to the mobile water station, no changes to the existing plumbing are required.

Yes, on low-pile carpets and rugs, in carpet vacuuming mode: the carpet vacuuming accessory for the CC1 is required.

No. The CC1 Pro uses PUDU VSLAM+ navigation, which combines vision and LiDAR and does not require QR codes or ceiling markers. It detects stationary and moving obstacles and recalculates the route when the space changes. During installation we map the premises and set up areas and routes.

Yes: while cleaning, noise stays below 70 dB (PUDU data), so it can also work in noise-sensitive areas. There is also a silent dust-mopping mode.

For each cleaning session you get the report, the map of the spots where waste accumulates and the performance heat map. The dashboard shows task completion, maintenance frequency and real-time alerts. The report history stays on the robot and in the cloud, and can be viewed with the PUDU Link app.

Yes. Several robots are managed from the same PUDU Link app, each with its own zones and schedules. Between the CC1 and MT1 series there is also collaborative cleaning: the CC1 Pro can call another robot to complete a zone or be called, for example by an MT1 that dry-sweeps.

Yes: Pudu CC1/CC1 PRO can be integrated with an IoT elevator control module that lets it use the elevator on its own and clean several floors. On the CC1 Pro, electronic gate control is also available as an option.

Wi‑Fi is not essential: the robot also communicates via 4G and Bluetooth. The connection is used to manage it remotely with the app and to receive notifications and reports; during the analysis we check coverage along the routes with you.

Yes, through the PUDU Open Platform (Cloud API): your system starts, pauses or cancels cleaning runs, sends the robot to the station and receives status, errors, reports and statistics. For those developing the integration there is the PUDU Skill, a package for AI programming tools that knows the up-to-date PUDU APIs and speeds up the work. API access goes through the distributor: we activate it and support your IT team or integrator.

Routine maintenance is simple: empty the dirty-water tank every day or every other day, clean the dust bin and brushes every 2 days and the squeegee every 2–3 days, sensors and underside every 3–5 weeks. Squeegee blades and dust-cloth blades are changed every 1–3 months depending on use; roller brushes when the bristles reach the wear indicator. You can get original spare parts and consumables from us.

LeanProducts, official PUDU distributor in Italy, handles surface analysis, installation, mapping and staff training, with direct support throughout Italy. On request we organise a demo at your premises.

LeanProducts provides direct support throughout Italy through its own technicians. Types of support offered:

  • phone support and remote access for questions or analysis;
  • on-site repair or, preferably, shipment to our premises;
  • specific training so you can work independently.

Yes, the manufacturer has signed a GDPR compliance declaration for CC1, CC1 Pro and the MT1 series. The robot does not record images of the surroundings and does not recognise faces. Where there is AI recognition of dirt and obstacles, each image stays in working memory, is analysed and deleted immediately, without being saved; recognition also works without internet. If needed, the RGB camera can be disabled and there is a blackout sticker: in that case the robot still cleans, but without recognising the type of dirt. Only operating data such as areas cleaned, tasks, status and faults goes to the PUDU cloud. We provide the declaration with the quote.

Yes. With PUDU Cloud Veil the data runs locally or on your private cloud and does not pass through PUDU servers: no data leakage at source and full control over the information, as required in environments with high confidentiality requirements. To connect the robot to your systems there is the PUDU Cloud Open API. We define the configuration and functions available for your model in the quote.

PUDU is certified ISO/IEC 27001:2022 for information security and ISO/IEC 27701:2019 for privacy, verified by the certification body DNV. Data is encrypted and stored encrypted, access is limited to authorised personnel and a dedicated department oversees information security. Vulnerabilities are reported through an official channel. On the robot, settings and working modes are password-protected and the software is updated remotely.

Yes, every robot comes with CE marking and an EU declaration of conformity. The CC1 Pro is certified to IEC 63327, the safety standard for automatic floor-cleaning machines for commercial use. For the other models we provide the declaration and the standards applied with the quote.

Accessory Products