Ball bearing carriage C8

Name: Ball bearing carriage C8
Brand: Bosch Rexroth
SKU: 3842524153

Carriage with dust-protected ball bearings for the guide profile 30x45C: it runs smoothly and carries profiles with slot C8, for sliding doors or movable suspended parts. Load capacity 150 N, M5x30 screws included.

Ball bearing carriage C8

The carriage runs in the guide profile 30x45C on dust-protected ball bearings and has a mount for profiles with slot C8. Use it to build custom sliding doors or to suspend movable parts above the workbench, for example a screwdriver holder. The two M5x30 fixing screws are included.

For 30x45C guideSlot C8 mountingBall bearings150 NScrews included

Why choose it

Easy sliding

Dust-protected ball bearings.

For sliding doors

Component for custom-size sliding doors.

Screws included

Two ISO 4762 M5x30 screws to fix it to the profile.

Data and compatibility

Property	Value
Guide	Guide profile 30x45C
Mounting	Profiles with slot C8
Load capacity Fmax	150 N
Material	Black PA · zinc-plated steel
Fastening	2 ISO 4762 M5x30 screws, included
Code	3 842 524 153

Fit the 30x45C end pieces at the ends of the guide: they act as a stop for the carriage.

Downloads

MGE catalogue pages 15 Download PDF

Related products

Guide profile 30x45CGuide profile 30x45C

End piece 30x45CEnd piece 30x45C, stop

Carriage with eyelet for guide 30x45CCarriage with eyelet, 200 N

Stop setSliding door stop set

Aluminium strut profile 30x30Profile 30x30, slot C8

Any other questions?Read the 10 FAQs →

Need help with your profile parts list?

Send us a sketch or the parts list: we will give you codes, accessories and cut lengths.

Request a quote Call +39 0434 572757

Specifications

Brand	Bosch Rexroth
Technical notes	Carriage with dust-protected ball bearings; incl. 2xFS2 (ISO 4762 M5x30)
Colour	black
Load capacity Fmax N	150
Slot mm	8
Material	Black PA / zinc-plated steel
Slot mm	8

Tags
Tags	Bosch 5S1

The carriage with eyelet is for hanging, for example with a snap hook, and carries 200 N. This one has ball bearings for smooth running and fixes to a profile with slot C8, with a load capacity of 150 N.

With the 30x45C end piece, which closes the end of the guide and acts as a stop. On sliding doors, the stop set gives cushioned closing.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.