Skip to Content
  1. All Products
  2. AL Modular System
  3. Other accessories
  4. Container fastening
[3842516905] Connection element for ESD wrist strap
[3842532879] T-connector for round tube profile D28

Container fastening

https://leanrobot.eu/web/image/product.template/3463/image_1920?unique=1d9bc53

Black ESD PA 66 fastening for attaching picking containers, trays, tool holders and grip tabs to profiles with slot C8 or C10. M5 screws included.

Read more ↓

Not Available For Sale

Code: 3842544797
  • Slot mm
  • Colour
  • Technical notes
  • ESD
  • Material

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S5
Contact Us
Other accessories
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

ESD yes
Technical notes For hooking tool holders, containers and picking trays; incl. screws M5x10/M5x16
Colour black
Slot mm 8/10
Material PA 66
Tags
Tags
Bosch 5S5

Yes, it is a single code for both slots. The supply includes M5x10 and M5x16 screws to adapt it to the profile.

With the D52 and D91 tool holders and their inserts, which take tools of different shapes, and with the container mount for hooking on containers and picking bins.

Yes, it is made of black ESD PA 66. To keep the whole workstation dissipative, also use ESD versions of containers and tool holders.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.