EcoFlow roller
EcoFlow roller for manual transfer lines on MV45x45 profile: in grey plastic (150 N) or zinc-plated steel ESD (500 N), lengths EL 225, 325, 425 and 525 mm. For wide containers and pallets.
AL Modular System · Manual handling
EcoFlow roller - rollers for transfer lines and gravity racks
The EcoFlow transfer line is built on the MV45x45 profile: the guide profiles keep the containers in the lane and the EcoFlow rollers, hooked into the supports, move them by hand or by gravity. Choose the plastic roller for light loads or the ESD conductive zinc-plated steel one when you need up to 500 N per roller. For widths other than the four standard ones there is the custom-length roller. It is the original Bosch Rexroth component.
Why choose it
Two load capacities
Grey plastic up to 150 N per roller, zinc-plated steel up to 500 N.
Four ready lengths
EL 225, 325, 425 and 525 mm; for other sizes choose the custom-length roller.
Hooks into the support
The roller fits in the EcoFlow roller supports along the line.
ESD in steel
The zinc-plated steel version is ESD conductive.
Choose it if…
- You are building an EcoFlow transfer line or gravity rack
- You move wide containers or pallets on rollers
- You need a load capacity of up to 500 N per roller
- The lane width matches a standard EL
Choose another solution if…
- You need a different EL length, in zinc-plated steel ESD: EcoFlow roller in zinc-plated steel ESD
- You need a stainless steel roller: EcoFlow roller in stainless steel
- You are building light lanes on U-profile: Roller D32 →
Planning a roller line? Send us the dimensions: we will suggest rollers, supports and lengths →
The EcoFlow line
Profiles, supports and rollers are chosen together based on the lane width.
The LeanProducts service
From parts list to ready-to-assemble kit, with a single point of contact:
Cutting to length
We cut the profiles in our workshop to the lengths in your parts list.
Check of codes and quantities
We start from your parts list or a sketch: we check components, accessories and quantities for every point of the structure.
Ready-to-assemble kits
You receive cut profiles and accessories grouped by structure, with the component list.
Spare parts
When you modify or extend the structure we supply the same original components.
Send us the parts list or a photo of the structure: we reply with codes and quantities.
Data and compatibility
| Property | Value |
|---|---|
| Length EL | 225 · 325 · 425 · 525 mm |
| Material and load capacity | Grey plastic: Fmax 150 N · zinc-plated steel: Fmax 500 N |
| ESD | Yes, in the zinc-plated steel version |
| Mounts on | EcoFlow roller support, in the line on MV45x45 profile |
| Other lengths | Custom-length roller: plastic EL 105…605 mm · zinc-plated and stainless steel EL 105…1005 mm |
| Versions | 8 codes: 4 lengths × plastic or zinc-plated steel |
Choose the variant above: data and code update in the Specifications tab. The load capacity is per single roller.
Downloads
Related products
EcoFlow roller supportEcoFlow roller support, pitch 50 mm
EcoFlow roller fastening deviceRoller fastening device, slot C8 or C10
Guide profile 45x45MV45x45 profile of the line
Guide profile MV45Guide profile MV45
EcoFlow separatorSeparator for one pallet at a time
EcoFlow brakeEcoFlow brake for gentle brakingNeed help with your roller line?
Send us a sketch or the dimensions: we will give you rollers, supports and lengths.