Automatic Charging Station for MT1
The automatic charging station for MT1 is the base for the MT1 series: when the battery is low the sweeping robot returns to the station and charges, in about 3 hours for the MT1 and in under 3.5 hours for the MT1 Vac and MT1 Max. This way the MT1 completes up to 3 cycles a day and can work 24/7.
The station only charges: the waste bin is emptied by hand and the robot alerts you when it is full. It is installed indoors, against a flat wall.
Documents
PUDU · Accessories MT1
Automatic charging station for MT1: the robot sweeper charges itself
The charging base for the series MT1: when the battery is low, the robot sweeper returns to the station and recharges, in about 3 hours for the MT1 and in less than 3.5 hours for the MT1 Vac e MT1 Max. With automatic charging the MT1 runs up to 3 full cycles a day and can work 24/7.
Why choose it
Charges on its own
The robot returns when the battery is low and recharges: about 3 hours for theMT1, less than 3.5 hours for the MT1 Vac e MT1 Max.
Up to 3 cycles a day
With automatic charging theMT1 completes up to 3 full cycles a day.
Simple installation
It stands against a flat wall and is fixed to the wall or to the floor.
Charging only
The station does not empty the waste container: the robot alerts you when it is full.
Data and compatibility
| Item | Value |
|---|---|
| Compatible with | Series MT1: MT1, MT1 Vac, MT1 Max |
| Dimensions | 32 × 24.15 × 60 cm |
| Power supply | AC 90–264 V, 50–60 Hz; max output 29.2 V / 20 A |
| Installation | Against a flat wall, fixed to the wall or to the floor |
| Clearance | 2 m in front, 1.5 m on each side |
| Environment | Indoors only, 0–40 °C, away from mirrors, glass and flammable materials |
The station only charges: the waste container is emptied by hand.
Pudu MT1 Sweeping Cleaning RobotCompatible robot
Pudu MT1 VAC Sweeping and Vacuuming Cleaning RobotCompatible robot
Pudu MT1 MAX Robot Sweeper for Car Parks and Semi-Outdoor AreasCompatible robotWant to know which accessory your PUDU robot needs?
Tell us the model, serial number and what your environment is like: we will confirm the right code and, if needed, check everything during a site visit.