Swivel-in sliding block with spring, stainless steel
The Bosch Rexroth Swivel-in sliding block with spring in stainless steel is engineered for AL Modular System profiles in slots C8 and C10, featuring free rotation and movement inside the T-slot thanks to its spring-loaded swivel mounting. Available in thread sizes M4, M5, M6, and M8, it supports a maximum load of 2200 N with a tightening torque of 10 Nm. Stainless steel construction combined with ESD compatibility makes it suitable for environments requiring corrosion resistance or electrostatic discharge control.
AL Modular System · Nuts and inserts
Swivel-in sliding block with spring, stainless steel
When a connection must withstand high forces, the sliding block is the right profile nut: it bears on a wide surface under the slot lips and distributes the load better than the T-nut. Slide it in from the profile end before closing the frame and move it to the mounting point. It is the original Bosch Rexroth component, in zinc-plated or stainless steel.
Why choose it
Withstands high forces
In slot C8 it reaches 6000 N versus 4000 N for the T-nut; in slot C10 up to 24000 N in the largest profiles.
Inserted from the end
Slide it in from the end of the profile and move it to the mounting point: it must be planned before closing the frame.
Stays where you put it
With the sliding block spring it stays in position in the slot, even on vertical uprights.
Zinc-plated or stainless
Zinc-plated steel for all slots; in slot C6 there is also a stainless steel version for damp environments.
Choose it if…
- The connection must withstand high forces
- You can insert the nuts before closing the frame
- You fit brackets, connectors and plates in load-bearing joints
- You need a stainless version in slot C6
Choose another solution if…
- You need to add an accessory to an already closed frame: Standard sliding block →
- A light fixing with front insertion is enough for you: T-nut →
- You want to make custom fixings with several threads: Sliding block profile, 1000 mm bar →
Not sure which profile to choose? Open the guide with the profile table →
What to use with the sliding block
Swivel-in sliding block
Goes in at the mounting point even in a closed frame.
Sliding block profile
1000 mm bar for custom fixings.
Always choose the sliding block for the same slot as the profile.
The LeanProducts service
From parts list to ready-to-assemble kit, with a single point of contact:
Cutting to length
We cut the profiles in our workshop to the lengths in your parts list.
Check of codes and quantities
We start from the parts list or a sketch: we check nuts, connectors, feet and accessories for every slot and every joint.
Ready-to-assemble kits
You receive cut profiles and accessories grouped by structure, with the component list.
Spare parts
When you modify or extend the structure we supply the same original components.
Send us the parts list or a photo of the structure: we reply with codes and quantities.
Data and compatibility
| Property | Value |
|---|---|
| Slot | C6 (6 mm) · C8 (8 mm) · C10 (10 mm) |
| For profiles | Series 20 (C6), series 30 (C8), series 40/45/50/60/80/90 (C10) |
| Material | Zinc-plated steel · stainless steel (slot C6 only) |
| Thread | C6: M4, M5 · C8: M4, M5, M6, M8 · C10: M5, M6, M8 |
| Load capacity Fmax | C6: 3000 N · C8: 6000 N · C10: up to 24000 N depending on the profile |
| Dimensions (height × length) | C6: 4 × 12 mm · C8: 6 × 16 mm · C10: 10.5 × 20 mm |
| Profile machining | Not required |
| Versions | 11 codes: C6 M4, M5 zinc-plated and stainless · C8 M4, M5, M6, M8 · C10 M5, M6, M8 |
Choose the variant above: data and code update in the Specifications tab. The load capacity is the static limit of the slot with the largest thread in the series.
Images and applications
T-nutT-nut
Aluminium strut profile 30x30Profile 30x30, slot C8
Aluminium strut profile 45x45Profile 45x45, slot C10Need help with your profile parts list?
Send us a sketch or the parts list: we will give you codes, accessories and cut lengths.
![[3842501753] Dado con testa a martello (C8, M6, Zinc-plated steel)](/web/image/product.product/13653/image_512/%5B3842501753%5D%20Dado%20con%20testa%20a%20martello%20%28C8%2C%20M6%2C%20Zinc-plated%20steel%29?unique=275fa20)
![[3842514930] Chiocciola standard (C8, M6, Zinc-plated steel)](/web/image/product.product/14501/image_512/%5B3842514930%5D%20Chiocciola%20standard%20%28C8%2C%20M6%2C%20Zinc-plated%20steel%29?unique=275fa20)
![[3842523921] Vite con testa a martello (C8, M6, 20 mm)](/web/image/product.product/13671/image_512/%5B3842523921%5D%20Vite%20con%20testa%20a%20martello%20%28C8%2C%20M6%2C%2020%20mm%29?unique=275fa20)